# ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle: A Review
If you are looking for a fast, effective, and safe way to stop leaks in your engine, transmission, power steering, differential, or hydraulic system, you may want to consider ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle. This product is a professional strength resealer that can restore worn or dried out seals and gaskets without harming the internal components or fluids. In this article, we will provide you with more information about this product, including its features, benefits, application, comparison with similar products, and some customer reviews.
Features of ATP Automotive AT-205 Re-Seal Stops Leaks
ATP Automotive AT-205 Re-Seal Stops Leaks is a liquid additive that can be poured directly into the oil filler of your vehicle. It works by softening and expanding the rubber seals and gaskets to stop leaks and prevent further deterioration. It does not contain any petroleum distillates that can over-swell or break down the seals. It is compatible with conventional and synthetic oils, ATF, gear oil, power steering fluids, and hydraulic oil. It can be used for gasoline and diesel engines, automatic and manual transmissions, rack and pinion and steering box power steering systems, conventional, limited slip and locker differentials, and plows, lifts, jacks and industrial hydraulic systems. It is not recommended for brake systems.
Benefits of ATP Automotive AT-205 Re-Seal Stops Leaks
Using ATP Automotive AT-205 Re-Seal Stops Leaks can provide you with several benefits, such as:
– Saving money on costly repairs or replacements of seals and gaskets
– Extending the life of your vehicle’s components and fluids
– Improving the performance and efficiency of your vehicle
– Reducing the environmental impact of oil leaks
– Preventing further damage to your vehicle’s parts
Application of ATP Automotive AT-205 Re-Seal Stops Leaks
To use ATP Automotive AT-205 Re-Seal Stops Leaks, you need to follow these simple steps:
1. Check the fluid level of the system that has a leak and make sure it is not overfilled.
2. Shake the bottle well before use.
3. Pour the entire 8 ounce bottle into the oil filler of the system. Do not overfill.
4. Start the engine and let it run for at least 5 hours or drive for at least 100 miles.
5. Check for leaks and fluid level again. If necessary, top off with the same type of fluid.
6. Repeat the process if the leak persists or reoccurs.
The amount of ATP Automotive AT-205 Re-Seal Stops Leaks needed may vary depending on the system capacity and the severity of the leak. Generally, one 8 ounce bottle will treat a 6 quart capacity with maximum effectiveness. You can adjust the usage based on the capacity of your system. For example, for a transmission with a 12 quart capacity, you may need two bottles. For a differential with a 2 quart capacity, you may need one-third of a bottle.
Comparison of ATP Automotive AT-205 Re-Seal Stops Leaks with Similar Products
There are many other products on the market that claim to stop leaks in various systems of your vehicle. However, not all of them are as effective or safe as ATP Automotive AT-205 Re-Seal Stops Leaks. Here is a comparison table that shows some of the differences between ATP Automotive AT-205 Re-Seal Stops Leaks and three other popular products:
| Product | ATP Automotive AT-205 Re-Seal Stops Leaks | Lubegard LG-Fixx Seal Fixx Multi-Purpose Stop Leak | Bar’s Leaks Oil Seal Engine Oil Burning & Leak Repair | Lucas Oil Products LUC10278 Engine Oil Stop Leak |
|---|---|---|---|---|
| Price | $19.25 | $14.99 | $9.99 | $10.99 |
| Size | 8 oz | 8 fl oz | 16.9 oz | 1 qt |
| Type | Liquid additive | Liquid additive | Liquid additive | Liquid additive |
| Compatible systems | Engine, transmission, power steering, differential, hydraulic | Engine oil only | Engine oil only | Engine oil only |
| Compatible fluids | Conventional and synthetic oils, ATF, gear oil, power steering fluids, hydraulic oil | Conventional and synthetic oils | Conventional and synthetic oils | Conventional and synthetic oils |
| Contains petroleum distillates | No | No | Yes | Yes |
| Works on rubber seals and gaskets only | Yes | Yes | No (also works on metal surfaces) | No (also works on metal surfaces) |
| Customer rating (out of 5 stars) on Amazon.com (as of September 20th 2023) | 4.5 | 4.4 | 3.9 | 4.5 |
As you can see from the table, ATP Automotive AT-205 Re-Seal Stops Leaks has several advantages over the other products, such as:
– It can be used for multiple systems, not just engine oil
– It is compatible with more types of fluids, not just conventional and synthetic oils
– It does not contain petroleum distillates that can harm the seals or the fluids
– It works on rubber seals and gaskets only, not on metal surfaces that can cause more problems
Customer Reviews of ATP Automotive AT-205 Re-Seal Stops Leaks
ATP Automotive AT-205 Re-Seal Stops Leaks has received many positive reviews from customers who have used it for various systems and vehicles. Here are some of the representative reviews from Amazon.com:
– “I had a power steering leak on my 2005 Honda Accord that was getting worse by the day. I was losing about a quart of fluid every week and had to constantly top it off. I decided to give this product a try before taking it to a mechanic. I followed the instructions and poured the whole bottle into the power steering reservoir. Within a day, the leak stopped completely. It’s been over a month now and I haven’t had to add any fluid at all. This stuff really works and saved me a lot of money and hassle.” – Eddie60175
– “I have a 2002 Ford Explorer with 180k miles that developed a rear main seal leak. It was leaving a small puddle of oil every time I parked it. I didn’t want to spend hundreds of dollars to fix it, so I looked for an alternative solution. I came across this product and decided to give it a shot. I poured it into the engine oil and drove it for about 100 miles. To my surprise, the leak stopped completely. No more oil spots on my driveway. I’m very impressed with this product and would recommend it to anyone with a similar problem.” – Stephen Throop
– “I have a 1999 Toyota Camry with 220k miles that had a transmission leak. It was dripping fluid from the front seal and making a whining noise when shifting gears. I was quoted $1200 to replace the seal and flush the transmission. I thought I had nothing to lose by trying this product first. I added it to the transmission fluid and drove it for a few days. The leak slowed down significantly and the noise went away. After a week, the leak was gone and the transmission was shifting smoothly. This product saved me a lot of money and extended the life of my car.” – Lisa M.
Conclusion
If you are looking for an easy, effective, and safe way to stop leaks in your vehicle’s engine, transmission, power steering, differential, or hydraulic system, you should consider ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle. This product is a professional strength resealer that can restore worn or dried out seals and gaskets without harming the internal components or fluids. It is compatible with conventional and synthetic oils, ATF, gear oil, power steering fluids, and hydraulic oil. It does not contain petroleum distillates that can over-swell or break down the seals. It can save you money on costly repairs or replacements of seals and gaskets, extend the life of your vehicle’s components and fluids, improve the performance and efficiency of your vehicle, reduce the environmental impact of oil leaks, and prevent further damage to your vehicle’s parts.
If you are interested in buying ATP Automotive AT-205 Re-Seal Stops Leaks, you can click on this link to order it from Amazon.com with fast and free shipping. You can also check out other customer reviews and ratings on the same page. Don’t let leaks ruin your vehicle or your wallet. Try ATP Automotive AT-205 Re-Seal Stops Leaks today and see the difference for yourself!
Link direct:
Click to Buy!
