# Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, 1.5″ x 15′ Roll Review
If you are looking for a high-quality heat reflective solution for your car, motorcycle, or other applications, you might want to consider the Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, 1.5″ x 15′ Roll. This product is designed to protect various parts of your vehicle or equipment from heat soak, which can reduce performance and damage components. In this article, we will provide you with some detailed information about this product, including its features, benefits, application of the crowd, similar products comparison, and some representative customer reviews. We hope this article can help you make an informed decision and purchase the product that suits your needs.
Features
The Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, 1.5″ x 15′ Roll is made from a metalized polyimide laminated to a lightweight glass fiber cloth with a high-temperature pressure-sensitive adhesive. This material has several advantages over other heat reflective products, such as:
– It can handle continuous temperatures up to 850°F and intermittent temperatures up to 1000°F, making it suitable for extreme temperature swing environments.
– It resists UV degradation, moisture, chemicals, and abrasion, ensuring long-term performance and durability.
– It has a low thermal conductivity and high reflectivity, which means it can effectively block radiant heat and reduce heat transfer.
– It has a thin (0.0065″) and flexible profile, which allows it to conform to complex shapes and tight spaces with minimal clearance.
– It has an easy-to-apply adhesive backing that is protected by a release liner rated up to 325°F. The adhesive is strong enough to prevent lifting or peeling off.
Benefits
By using the Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, 1.5″ x 15′ Roll, you can enjoy several benefits for your vehicle or equipment, such as:
– Improving performance and efficiency by reducing heat soak into air boxes, intakes, intercoolers, turbochargers, superchargers, radiators, oil coolers, etc.
– Protecting sensitive components from heat damage, such as wiring harnesses, sensors, hoses, cables, fuel lines, brake lines, etc.
– Enhancing aesthetics and appearance by adding a gold metallic finish to your engine bay or other parts.
– Saving money and time by avoiding costly repairs or replacements due to heat-related issues.
Application of the Crowd
The Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, 1.5″ x 15′ Roll is suitable for anyone who wants to improve the thermal management of their vehicle or equipment. It can be used for various applications, such as:
– Cars, trucks, SUVs, motorcycles, ATVs, UTVs, etc.
– Racing vehicles, such as dragsters, stock cars, rally cars, etc.
– Marine vehicles, such as boats, jet skis, etc.
– Industrial equipment, such as generators, compressors, pumps, etc.
– Aerospace equipment, such as rockets, satellites, etc.
To apply the product, you need to follow these steps:
– Clean and degrease the surface that you want to cover with the product.
– Cut the product to the desired size and shape with scissors or a utility knife.
– Peel off the release liner and carefully align the product on the surface.
– Press firmly and smooth out any air bubbles or wrinkles with your fingers or a roller.
– Trim any excess material with a razor blade or a utility knife.
Similar Products Comparison
To help you compare the Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, we have selected three similar products from other brands and listed their main features and prices in the table below.
| Product | Features | Price |
|---|---|---|
| Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll | – Metalized polyimide laminated glass fiber cloth – High-temperature pressure-sensitive adhesive – Continuous temperature up to 850°F – UV resistant – Thin (0.0065″) and flexible – Easy to apply and remove |
$29.15 |
| Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier | – Aluminized woven cloth – High-temperature adhesive – Continuous temperature up to 2000°F – UV resistant – Thick (0.031″) and rigid – Difficult to apply and remove |
$23.99 |
| Sporacingrts Gold Adhesive Backed Heat Barrier Tape | – Glass fiber cloth with gold coating – High-temperature adhesive – Continuous temperature up to 662°F – UV resistant – Thin (0.008″) and flexible – Easy to apply and remove |
$15.99 |
| Heatshield Products 170002 Heatshield Armor | – Bio-soluble silica insulation with aluminum facing – High-temperature adhesive – Continuous temperature up to 1800°F – UV resistant – Thick (0.25″) and rigid – Difficult to apply and remove |
$39.99 |
As you can see from the table, the Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll has some advantages over the other products, such as:
– It has a higher continuous temperature rating than the Sporacingrts product, which means it can handle more extreme heat conditions.
– It has a thinner and more flexible profile than the Thermo-Tec and Heatshield products, which means it can fit better in tight spaces and complex shapes.
– It has a more attractive gold metallic finish than the other products, which means it can enhance the appearance of your vehicle or equipment.
Customer Reviews
To give you a better idea of what other customers think about the Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, we have selected some representative reviews from Amazon.com and summarized them below.
– One customer said that the product worked perfectly for his turbocharged car, as it lowered the intake temperatures by 30 degrees F and reduced spark knock. He also said that the product was easy to apply and did not peel off even after exposure to rain and high heat.
– Another customer said that the product was excellent for his motorcycle, as it protected his fuel tank and seat from heat soak. He also said that the product was durable and did not fade or crack after several months of use.
– A third customer said that the product was great for his generator, as it reduced the noise and vibration from the engine. He also said that the product was easy to cut and stick, and did not come off even after washing.
– A fourth customer said that the product was good for his boat, as it insulated his engine compartment and exhaust system. He also said that the product was lightweight and flexible, and did not affect the performance of his boat.
Conclusion
The Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll is a high-quality heat reflective solution that can improve the performance and efficiency of your vehicle or equipment, protect sensitive components from heat damage, enhance aesthetics and appearance, and save money and time. It is made from a metalized polyimide laminated glass fiber cloth with a high-temperature pressure-sensitive adhesive, which makes it capable of handling extreme temperatures, resistant to UV degradation, thin and flexible, and easy to apply and remove. It is suitable for various applications, such as cars, motorcycles, boats, generators, etc. It has some advantages over similar products from other brands, such as higher temperature rating, thinner profile, and more attractive finish. It has received many positive reviews from customers who have used it for different purposes.
If you are interested in purchasing the Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, you can click on this [link] to go to Amazon.com and place your order. We hope this article has provided you with useful information and helped you make an informed decision. Thank you for reading!
Link direct:
Click to Buy!
